AC Installation in Jacksonville & Ponte Vedra

A new air conditioning system is one of the biggest investments you’ll make in your home, and in Northeast Florida, it’s one of the most important. The right system, properly sized and installed, keeps your family comfortable, your energy bills predictable, and your home protected from Florida’s heat and humidity for the next 15 to 20 years.

PV Plumbing & Air takes installation seriously. We don’t sell you the biggest unit on the truck. We calculate exactly what your home needs, recommend systems that fit your budget and efficiency goals, and install the HVAC to manufacturer specifications so your warranty stays intact. Reach out to us today.

Our AC Installation Process

Home Assessment & Load Calculation

Every installation starts with a Manual J load calculation. We measure your home’s square footage, insulation levels, window exposure, ceiling height, and ductwork to determine the exact cooling capacity your home requires. This isn’t optional. It’s how you avoid an oversized system that short-cycles and drives up humidity, or an undersized system that runs all day and never catches up.

System Recommendation

Based on the load calculation, we recommend two to three options at different efficiency levels and price points. We’ll walk you through the differences between SEER2 ratings, single-stage vs. variable-speed compressors, and what each choice means for your monthly energy bill. No pressure, no upselling. Just clear information.

Professional Installation

Our technicians install to manufacturer specifications and local building codes. That means proper refrigerant line sizing, correct electrical connections, sealed ductwork connections, and a thermostat setup that’s calibrated to your home. A quality installation is the difference between a system that lasts 8 years and one that lasts 20.

What to Know About SEER2 Ratings

As of January 2023, all new residential AC systems sold in the U.S. must meet updated SEER2 efficiency standards. Here’s what that means for you:

Minimum SEER2 for Florida (Southeast Region): 15 SEER2 for split systems, 14.3 SEER2 for packaged units.

What SEER2 means in practice: – A 15 SEER2 system is the baseline. It meets code but offers moderate efficiency – An 18–20 SEER2 system reduces cooling costs by 20–30% compared to the minimum – A 20+ SEER2 variable-speed system offers the best efficiency and humidity control but carries a higher upfront cost

Our recommendation for Northeast Florida: For most homes, a 16–18 SEER2 system hits the sweet spot between installation cost and long-term energy savings. We’ll show you the payback timeline for each option so you can decide what makes sense.

Types of AC Systems We Install

Central Air Conditioning (Split Systems)

The most common setup in Northeast Florida homes. An outdoor condenser unit paired with an indoor air handler connected by refrigerant lines. Ideal for homes with existing ductwork.

Heat Pump Systems

A heat pump provides both cooling and heating from a single outdoor unit. For Florida’s mild winters, this is often the most efficient choice, eliminating the need for a separate furnace. We install both standard and variable-speed heat pumps.

Ductless Mini-Split Systems

Perfect for home additions, converted garages, sunrooms, or older homes without ductwork. Each indoor unit cools a specific zone, giving you precise temperature control room by room. Learn more on our ductless mini-split page.

Packaged Systems

All-in-one units that house both heating and cooling components in a single outdoor cabinet. Common in homes with limited indoor space for an air handler.

Signs It’s Time for a New AC System

Your System Is 15+ Years Old

Even well-maintained systems lose efficiency over time. If your unit was installed before 2010, it’s running on older technology and likely uses R-22 refrigerant, which is no longer manufactured.

Repair Costs Are Adding Up

One major repair is normal. Two or three in a year? That money is better invested in a new system with a full manufacturer warranty.

Your Energy Bills Keep Climbing

Older systems work harder to produce the same cooling output. A new, higher-efficiency unit can reduce cooling costs by 30–50% depending on what you’re replacing.

Uneven Cooling or Humidity Problems

If some rooms are always warm or the house feels humid even with the AC running, your current system may be improperly sized, a problem that only a new, correctly calculated installation can solve.

Your System Uses R-22 Freon

R-22 was phased out in 2020. Remaining supplies are expensive and shrinking. If your system develops a refrigerant leak, the refill cost alone can approach the price of a new system.

Why Choose PV Plumbing & Air for Your Installation

Proper Load Calculations, Not Guesswork

We size every system using Manual J calculations. That means your new AC is matched to your home, not to a rule-of-thumb estimate.

Brand-Neutral Recommendations

We install systems from multiple manufacturers including Carrier, Trane, Rheem, Goodman, Lennox, and others. We recommend what’s best for your home and budget, not what earns us the highest margin.

Financing Options

A new AC system is a significant investment. We offer flexible financing to help you get the right system now without the full upfront cost.

Complete Warranty Protection

Every installation includes the manufacturer’s equipment warranty plus our 8-year craftsmanship guarantee on workmanship. If something isn’t right with our installation, we fix it. No questions asked.

Get Your Free AC Installation Estimate

Ready to replace your aging system or install AC in a new space? Call 904-392-7967 or fill out the form below. We’ll schedule a free home assessment and provide a detailed, no-obligation estimate. Contact us today. Ask us about our AC maintenance program.